Conductive Silver Inks/Coatings

RemoveProductApplication / Product FeaturesSubstrateApplication MethodSurface ResistancePDF
CompareProductApplication / Product FeaturesSubstrateApplication MethodSurface ResistancePDF
AG-500A
Silver Conductive Ink

Very conductive ink designed for highly reliable membrane switches in appliance, military, medical applications & sensors. Good silver conductive ink for EL panels with ITO (indium tin oxide),touch screen or substrates with difficult adhesion.

Polyester, polyimide, PET, and best product to print onto ITO and sputtered glass

Screen print, or thin to spray or dip for EMI/RFI

< .010 Ω/square/mil

PDF
AG-510
Silver Conductive Ink

Highly conductive with a faster drying solvent. Designed for highly reliable membrane switches in appliance, military, medical applications & sensors. Best silver conductive ink for EL panels with ITO (indium tin oxide),touch screen or substrates with difficult adhesion.

Polyester, polyimide, PET, and best product to print onto ITO and sputtered glass

Screen print, or thin to spray or dip for EMI/RFI

< .015 Ω/square/mil

PDF
AG-800
Silver Conductive Ink

For standard flex circuits, membrane switch & other printed applications requiring excellent conductivity at reasonable cost.

Polyester, metal and polycarbonate

Screen print, or thin to spray or dip

< .015 Ω/square/mil

PDF
AG-919
Heat Stable Silver Ink

Heat stable at tempsof 180 to 200°C for flex circuits, membrane switch, EMI/RFI shielding & other printed applications.

Polyester, polyimide, metal, and polycarbonate

Screen print, or thin to spray or dip

< .040 Ω/square/mil

PDF
AG-1074
Silver Conductive Ink

Dries qickly at room temperature for pad print applications.

Polyester, polyimide, and most other polymer substrates, as well as metal

Pad Print

< .050 Ω/square /mil

PDF
WB-1078
Water-Based Silver Conductive Ink

Water-based ink with low viscosity for gravure & flexographic printing of RFID & cell phone antennas, medical EEG & EKG sensors, and EMI/RFI shielding

Wide variety of plastic and metal substrates

Spray, dip, coat or gravure

< .025 Ω/square/mil

PDF
Z-904
UV Curable Anisotropic Ink

UV curable anisotropic ink conductive in the z-axis thickness only. For printing or over coating conductive ink tail pins on membrane switches to provide silver ink protection when ZIF or crimp type metal connectors are attached, while still maintaining electrical conductivity between the metal connector and the silver ink.

Print treated polyester, other plastic films, conductive inks & most metal foils

Screen print

< 5.0 x 1014 Ω/square /mil

PDF