AG-500A Silver Conductive Ink

Applications:

  • Circuit and Electromechanical Assemblies
  • EL Panel and LED Lighting
  • Membrane switch
  • Touch screens
  • Printed Heaters
  • Other printed electronic applications

Features:

  • Screen printable
  • Extremely tough, scuff resistant and crease resistant
  • Ideal for long traces
  • Excellent adhesion to polyester, polyimide, ITO and most other substrates
  • Compatible with our UV curable dielectrics, all of our conductive epoxy adhesives and our UV curable component encapsulants and conformal coatings

AG-800 Silver Conductive Ink

Applications:

  • Flex circuits
  • Membrane switches
  • Additive circuits
  • EMI/RFI applications
  • Thermal targets

Features:

  • Good conductivity
  • Screen print
  • Thin for spray or dipping
  • Can blend with carbon to customize resistance
  • Crease resistant

Antistat-268 Water Based Carbon Resistive Coating

Applications:

  • Coating for paper, cardboard, wood and most plastic substrates
  • Saturant for urethane foam

Features:

  • Water based antistatic coating or saturant
  • Can be dipped, roll coated or sprayed
  • Can be crosslinked for increased hardness & durability

C-808 Highly Conductive Water-Based Coating

Applications:

  • Coating for paper, cardboard, wood, metal and most plastic substrates
  • Saturant for urethane foam

Features:

  • More conductive version of Antistat-268
  • Rotogravure, spray, coat, dip
  • Water based antistatic coating or saturant

EP-600 Two-Part Silver Filled Conductive Epoxy

Volume Resistivity: < 1.0 x 10-3 Ω-cm

Applications:

  • Component or wire attachment
  • Filling via holes or spaces

Features:

  • Two-part electrically conductive epoxy
  • Dot dispense, screen print or manual dispense
  • Low cure temperature
  • Fast curing
  • Suitable for flexible substrates
  • 6 month shelf life
  • Available in pre-measured CC-paks or bulk

EP-799 Black Potting Compound

Volume Resistivity: < 1.0 x 1014 Ω-cm

Applications:

  • Potting components or assemblies
  • Protection against moisture
  • Protection against thermal or mechanical shock

Features:

  • Excellent moisture resistance
  • Excellent toughness and flexibility
  • Fast curing
  • Excellent mechanical properties and heat resistance

UV-1006S UV Curable Dielectric

Surface Resistivity: @25°C 2.9 x 1013 Ω/square/mil

Applications:

  • Printed insulation layers for circuits
  • Touch screens
  • El panels
  • Flexible printed substrates

Features:

  • 100% solids
  • Adheres to difficult substrates such as ITO or other metal oxides
  • Screen print, dip, roll, knife over roll, and curtain coating

UV-2530 UV Curable Matte Dielectric

Surface Resistivity: @25°C 5.0 x 1015 Ω/square

Applications:

  • PTF circuits
  • Flexible circuit substrates
  • Printed insulation layers for circuits
  • Dielectric layer for membrane switch crossover and tail coat applications on flexible circuits & membrane switches

Features:

  • Matte finish
  • Screen printable, dip, roll, knife over roll, curtain coating or die application
  • 100% solids
  • Available in clear, blue or green colors
  • Low odor

UV-2531 UV Curable Glossy Dielectric

Surface Resistivity: @25°C 5.0 x 1015 Ω/square/mil

Applications:

  • PTF circuits
  • Flexible circuit substrates
  • Printed insulation layers for circuits
  • Dielectric layer for membrane switch crossover and tail coat applications on flexible circuits & membrane switches

Features:

  • Glossy finish
  • Screen print, dip, roll, knife over roll coating, curtain coating or die application
  • 100% solids
  • Available in clear, blue or green colors
  • Low odor

UV-3010 UV Curable Coating/Encapsulant

Surface Resistivity: @25°C 3.8 x 1014 Ω/square/mil

Applications:

  • Component encapsulation
  • Printed circuit board protection

Features:

  • 100% solids
  • Dot dispensable
  • Moisture resistant
  • Suitable for flexible substrates
  • Can be sprayed or dipped

Z-904 Ultraviolet Curable Anisotropic Ink

Applications:

  • For screen printing over conductive ink tail pins on flexible circuits and membrane switches, to provide protection for silver ink when using ZIF or crimp type metal connectors, while still maintaining electrical conductivity between the metal connector and the silver ink pin.

Features:

  • Designed to conduct electricity on the Z-axis through the thickness, and not along the width (X-Axis) or length (Y-Axis) of the printed ink.
  • Excellent strength, toughness, flexibility, inherent moisture resistance, and low odor.