AG-500A Silver Conductive Ink

Applications:

  • Circuit and Electromechanical Assemblies
  • EL Panel and LED Lighting
  • Membrane switch
  • Touch screens
  • Printed Heaters
  • Other printed electronic applications

Features:

  • Screen printable
  • Extremely tough, scuff resistant and crease resistant
  • Ideal for long traces
  • Excellent adhesion to polyester, polyimide, ITO and most other substrates
  • Compatible with our UV curable dielectrics, all of our conductive epoxy adhesives and our UV curable component encapsulants and conformal coatings

AG-510 Silver Conductive Ink

Applications:

  • Additive circuits
  • Printed heaters
  • PTF circuits
  • Defibrillator pads
  • EKG/EEG electrodes
  • Blood glucose sensors
  • EMI/RFI applications
  • EL panels
  • Membrane switches

Features:

  • Screen print
  • Fast Drying
  • High conductivity
  • Thin for spray or dipping
  • Can blend with carbon to customize resistance

AG-800 Silver Conductive Ink

Applications:

  • Flex circuits
  • Membrane switches
  • Additive circuits
  • EMI/RFI applications
  • Thermal targets

Features:

  • Good conductivity
  • Screen print
  • Thin for spray or dipping
  • Can blend with carbon to customize resistance
  • Crease resistant

BT-101 Barium Titanate Dielectric

Volume Resistivity: > 1 x 1014 Ω-cm

Applications:

  • Capacitance layer between phosphor and back electrodes for EL lamps on polyester or ITO substrates

Features:

  • Rigid thermal dielectric
  • Electrically insulating
  • Very moisture resistant
  • Produces mirror smooth surface finish

PH-745 Phosphor Binder

Surface Resistivity: 5.0 x 1015 Ω/square

Applications:

  • For use as a capacitance layer in EL Applications

Features:

  • Blend with phosphor powder for customer blended ink
  • Excellent flexibility electrical insulation
  • Maintains high dielectric constant for optimal EL lamp performance
  • Outstanding adhesion to ITO surfaces

UV-1006S UV Curable Dielectric

Surface Resistivity: @25°C 2.9 x 1013 Ω/square/mil

Applications:

  • Printed insulation layers for circuits
  • Touch screens
  • El panels
  • Flexible printed substrates

Features:

  • 100% solids
  • Adheres to difficult substrates such as ITO or other metal oxides
  • Screen print, dip, roll, knife over roll, and curtain coating

UV-3010 UV Curable Coating/Encapsulant

Surface Resistivity: @25°C 3.8 x 1014 Ω/square/mil

Applications:

  • Component encapsulation
  • Printed circuit board protection

Features:

  • 100% solids
  • Dot dispensable
  • Moisture resistant
  • Suitable for flexible substrates
  • Can be sprayed or dipped

Z-904 Ultraviolet Curable Anisotropic Ink

Applications:

  • For screen printing over conductive ink tail pins on flexible circuits and membrane switches, to provide protection for silver ink when using ZIF or crimp type metal connectors, while still maintaining electrical conductivity between the metal connector and the silver ink pin.

Features:

  • Designed to conduct electricity on the Z-axis through the thickness, and not along the width (X-Axis) or length (Y-Axis) of the printed ink.
  • Excellent strength, toughness, flexibility, inherent moisture resistance, and low odor.