Solar Panels

AG-500A Silver Conductive Ink

Applications:

  • Circuit and Electromechanical Assemblies
  • EL Panel and LED Lighting
  • Membrane switch
  • Touch screens
  • Printed Heaters
  • Other printed electronic applications

Features:

  • Screen printable
  • Extremely tough, scuff resistant and crease resistant
  • Ideal for long traces
  • Excellent adhesion to polyester, polyimide, ITO and most other substrates
  • Compatible with our UV curable dielectrics, all of our conductive epoxy adhesives and our UV curable component encapsulants and conformal coatings

AG-510 Silver Conductive Ink

Applications:

  • Additive circuits
  • Printed heaters
  • PTF circuits
  • Defibrillator pads
  • EKG/EEG electrodes
  • Blood glucose sensors
  • EMI/RFI applications
  • EL panels
  • Membrane switches

Features:

  • Screen print
  • Fast Drying
  • High conductivity
  • Thin for spray or dipping
  • Can blend with carbon to customize resistance

AG-800 Silver Conductive Ink

Applications:

  • Flex circuits
  • Membrane switches
  • Additive circuits
  • EMI/RFI applications
  • Thermal targets

Features:

  • Good conductivity
  • Screen print
  • Thin for spray or dipping
  • Can blend with carbon to customize resistance
  • Crease resistant

EP-600 Two-Part Silver Filled Conductive Epoxy

EP-600 two-part silver-filled conductive epoxy is designed for component attachment, termination and other applications in hybrid circuits, membrane keypads and other electromechanical assemblies.

Volume Resistivity: < 1.0 x 10-3 Ω-cm

Applications:

  • Component or wire attachment
  • Filling via holes or spaces

Features:

  • Two-part electrically conductive epoxy
  • Dot dispense, screen print or manual dispense
  • Low cure temperature
  • Fast curing
  • Suitable for flexible substrates
  • 6 month shelf life
  • Available in pre-measured CC-paks or bulk

For additional strength and protection for EP-600, we recommend UV-3010 UV Curable Coating/Encapsulant. It is an optically clear coating or encapsulant that has been engineered to provide component protection for resistance from moisture, dust and dirt on printed circuit boards. It also provides additional staking strength for LED component in membrane switches. Learn more https://kayakuam.com/products/uv-3010-uv-curable-coating-encapsulant/

UV-2530 UV Curable Matte Dielectric

Surface Resistivity: @25°C 5.0 x 1015 Ω/square

Applications:

  • PTF circuits
  • Flexible circuit substrates
  • Printed insulation layers for circuits
  • Dielectric layer for membrane switch crossover and tail coat applications on flexible circuits & membrane switches

Features:

  • Matte finish
  • Screen printable, dip, roll, knife over roll, curtain coating or die application
  • 100% solids
  • Available in clear, blue or green colors
  • Low odor

UV-2531 UV Curable Glossy Dielectric

Surface Resistivity: @25°C 5.0 x 1015 Ω/square/mil

Applications:

  • PTF circuits
  • Flexible circuit substrates
  • Printed insulation layers for circuits
  • Dielectric layer for membrane switch crossover and tail coat applications on flexible circuits & membrane switches

Features:

  • Glossy finish
  • Screen print, dip, roll, knife over roll coating, curtain coating or die application
  • 100% solids
  • Available in clear, blue or green colors
  • Low odor

UV-3010 UV Curable Coating/Encapsulant

Surface Resistivity: @25°C 3.8 x 1014 Ω/square/mil

Applications:

  • Component encapsulation
  • Printed circuit board protection

Features:

  • 100% solids
  • Dot dispensable
  • Moisture resistant
  • Suitable for flexible substrates
  • Can be sprayed or dipped